Aztec Polymer clay cutter - B/ Aztec Clay cutter/ Fondant cutters / 3d cookie cutters / mini clay cutter / Fondant Clay cutters / Fondant Polymer cutters
SHIPPING: Please do check our new updated Shipping Policy/FAQ.
©2021 DIY stencils
Please Note: The size mentioned is either length or width. All sizes are measured by the longest edge of the clay cutter ( inside to inside edge).
- Please refer to the chart for dimensions.
- Dimensions are listed as standard inches (and mm).
The height or depth of the cutters is 0.5 inches (12 mm). If you need a specific height, please contact me.
Lay your clay flat on your work surface. Ceramic tiles make ideal work surfaces for polymer clay. To avoid clay getting trapped in small edges, place a piece of cling wrap (plastic wrap) between the clay. Alternatively, stroke your clay with cornflour before pressing the cutters into the clay. Else it might cause the clay to get trapped into the cutter. If that happens, remove the clay with a needle or a toothpick with care and wash with warm soapy water.
3D printed cutters do not give a clean cut and often require the edges of the pieces to be sanded after baking. To minimize the sanding, before baking use a clay tool or your fingers to gently press/remove the excess clay. Gently stroke the edges of the piece to even it.
We print our cutters on a 3D printer, using a high-quality food-safe PLA. The cutters we make are to be washed by hand only in warm soapy water and are not dishwasher safe. Putting the cutters in a dishwasher could melt, warp or otherwise damage the PLA.
They also come with a stepped edge to make a clean crisp cut in your dough.
There is minor imperfection and also a seam as the nature of 3D printing.
Materials: Food Safe PLA
Color for clay cutters and stamps may vary depending on the availability of PLA,
(Colour finish is based on what filament is in stock)
Cutters are printed as they are ordered. We do not keep a stock of printed cutters on hand.
If you have a specific design, size, or color that is not available here, please feel free to message us! We will help you!